Product Description
Within a short span of time, we have emerged as the topmost company offering Water And Waste Water Coatings. These are ideal for coating T-head bolts, stainless steel fasteners and pipelines. Ideal for use in underground water works service, these Water And Waste Water Coatings protect the potable water and wastewater treatment plants that are readily exposed to a plenty of impurity and chemicals.
Key points:
- Offer high- end performance against corrosion
Best suited for coating:
- Fire safety system valves
- Desalination plant
- Pipelines
- Hydro power generation plan
Potable water and wastewater treatment plants must withstand plenty of abuse and impurity. TECOSY offer high-performance water and waste water treatment coatings that defend treatment facilities against corrosion.
Types of Water and waste water Coatings:
Potable Water
Desalination plant, Fire safety system valves and pipeling, Hydro power generation plant.
Non Potable water
Hydrogen sulfide and other corrosive chemicals found as a result of wastewater sewage corrosion can cause standard cadmium-plated or hot-dipped galvanized nuts and bolts to rust or fail, making them difficult to remove. When this occurs, disassembling requires additional man hours for torching, cutting and nut splitting. We offers superior corrosion resistance and proven durability, making it ideal for coating stainless steel fasteners, T-head bolts, pipelines used in underground water works service.
Robust Protection for Water InfrastructureOur epoxy resin-based coating delivers durable protection to both concrete and steel surfaces in water treatment facilities, ensuring longevity and resistance to harsh chemicals, UV exposure, and abrasion. Its high adhesive strength provides a reliable waterproof barrier for demanding environments where performance and safety are paramount.
Health and Safety StandardsCertified under IS 9833 and ASTM D543, and formulated for low VOC content, this coating meets rigorous health and environmental requirements. Its non-toxic nature and compatibility with potable water systems guarantee that its safe for use in drinking water tanks and related structures.
Efficient Application and Curing ProcessThe liquid is easily applied by brush, roller, or spray, offering versatility for different project sizes. With a rapid touch-dry time of 812 hours and achievement of full strength in 7 days, project turnaround is optimized without compromising on efficacy or durability.
FAQs of Water And Waste Water Coatings:
Q: How should Water and Waste Water Coating be applied for optimal results?
A: For best performance, thoroughly mix the resin and hardener in a 2:1 ratio, then apply to clean, dry concrete or steel surfaces using a brush, roller, or spray. Ensure uniform coverage between 200500 microns thickness as specified, giving attention to surface preparation for maximum adhesion.
Q: What surfaces are compatible with this epoxy coating?
A: This product is suitable for waterproofing and protecting concrete and steel surfaces, especially in water treatment plants, potable water tanks, and waste water structures. It provides excellent chemical resistance and durability regardless of exposure conditions.
Q: When does the coating reach full curing and operational strength?
A: The coating becomes touch dry 812 hours after application and achieves its full cure and operational strength in 7 days. It is recommended to avoid water contact until the full curing period is completed for optimal performance.
Q: Where should the coating be stored prior to use?
A: Store the product in its unopened HDPE container, in a cool and dry place, away from direct sunlight to maintain its 12-month shelf life and prevent premature degradation.
Q: What are the main benefits of using this coating on water infrastructure?
A: Key benefits include high chemical and abrasion resistance, waterproofing capabilities, excellent adhesive and compressive strength, and UV durability. Its non-toxic formulation and compliance with potable water standards ensure safety and longevity in critical infrastructure.
Q: How much area does one 20-litre pack cover and what is the recommended application method?
A: A 20-litre pack typically covers 4050 square meters at the specified thickness. The coating can be applied using a brush, roller, or spray, allowing flexibility depending on the projects size and complexity.
Q: What safety and environmental standards does the product comply with?
A: This coating complies with IS 9833 and ASTM D543 standards, offering low VOC emissions, high purity (>99%), and is safe for potable water applications, making it environmentally responsible for use in drinking water and waste water management systems.
